Com Port Conflict with Windows 32-bit Operating System
In Windows XP / 2000/ NT Com Ports are actively managed by the Windows operating System. Because TrafMan is a DOS Program conflicts can arise when TrafMan tries to access already busy or non existent ports. To fix this you must go into TrafMan setup and change the Com Port settings to only scan ...
- Compatible USB to Serial Cables (Devices)
The results below are for Windows XP SP2 Operating System Device Centurion TrafMan Sabrent SBT-USC1K (Prolific) Yes Yes Sabrent SBT-USC1M Yes No CablesToGo Model#26886 (Prolific) Yes Yes BAFO technologies BF-810 ***Carrier Detect Issues*** Yes Yes TrendNet TU-S9 Yes Yes ...
- TT-6w or TT-8w Serial Numbering Using Bluetooth | XP
To enter the serial number for your TT6 or TT8 Wireless Traffic Counter Units please use the following steps: Start Hyperterminal* on your Workstation or PC (Start > Programs > Accessories > Communications > HyperTerminal) Click on the Disconnect Phone icon in HyperTerminal to disco ...
- How to remove Bluetooth wireless device support | Windows XP Service Pack 2
This article discusses how to remove Bluetooth wireless device support from Microsoft Windows XP Service Pack 2 (SP2). By default, Windows XP SP2 installs Bluetooth wireless device support when you install Windows XP SP2 to a computer. After installation, if a Bluetooth wireless device or radio ...
- How to Manage Devices | XP
When you use Device Manager, you have a graphical view of the hardware that is installed on your computer. You can use Device Manager to change the way your hardware is configured, and to change the way your hardware interacts with your computer's microprocessor. When you use Device Manager, y ...
- IRQ Conflicts & Settings | XP
IRQ Settings, how to view IRQ assignments and resolve IRQ conflicts What is an IRQ? IRQ stands for Interrupt ReQuest and refers to special numbered channels that are used by devices to get the processors attention. For example, when you press a key on your keyboard this sends a signal to the p ...
- TrafMan Installation | Windows XP
TO ALL WINDOWS USERS: Windows XP / 2000 / NT Users must configure com ports to avoid windows access conflicts. TrafMan installation uses the Installshield® Windows installer. The typical setup file will use the windows wizard install format used in current windows programs al ...
- Optimal CONFIG.SYS Settings for TrafMan
ICS#110101-1: Optimal CONFIG.SYS Settings for TrafMan Software Virtually all PC's in use today operate using the Windows 95, 98, NT or later operating systems (OS). Windows XP uses a different approach to handling memory configurations for MS-DOS programs please refer to our KB document "Maximi ...
- Adding Command Line Switches to Centurion Executable
Follow these steps to create a shortcut to start Centurion from the Windows desktop with a command line switch: Right-click the Windows desktop, point to New on the shortcut menu that appears, and then click Shortcut. In the Create Shortcut dialog box, click Browse. In the Browse dialog box, c ...
- COM Ports Missing & Modems | XP
COM Port Missing from List of Available Ports When You Try to Install a New Modem While you are using the Add Hardware Wizard to install a new modem, you may find that one of your COM ports is not in the list of available COM ports. This behavior can occur if another program or service is holdin ...
