Category » Apollo

There were 5 articles found in this category:

1. Naming conventions and Station ID’s used in Centurions Database.
   It is important to note that the Station ID referenced in Centurion’s Database is the Same Site ID that is referenced in our counters and classifiers. Each Location that you collect data from needs to have a unique name that can NOT be used elsewhere for data collection purposes. If you ...
2. UAA Testing with the Calibrator data differences.
   There is a known issue with the Calibrotor and the UAA (Unicorn Limited, Apollo) units not displaying speeds correctly the following information explains why this is: Consider the following two vehicles. The first is from a UAA V1.53 counter, in monitor mode, with the Basicon connected (Class), ...
3. Setting the Apollo to Display Metric
   Setting an Apollo to Display Metric (Manual Configuration of Counter) POWER ON power to Apollo Press the ALT + LEFT ARROW together. This will take the operator to the ‘ADVANCED SELECTIONS’ menu Use the RIGHT ARROW and toggle to ‘Configure System’ option, press ‘E ...
4. Retrieve Data Files Using a DataHog
   RETRIEVING DATA FILES FROM THE APOLLO USING A DATAHOG: Turn off power to APOLLO, closing data study and moving all files to memory. Connect standard 9 pin (male to female) serial cable to DATAHOG Field Data Collector. Connect other end to port on APOLLO faceplate. Turn on power to DATAH ...
5. How To Manually Erase Data Files from the Apollo
   TO MANUALLY ERASE DATA FILES FROM THE APOLLO NOTE: USE THIS FEATURE ONLY IF YOU ARE CERTAIN YOU WANT TO ERASE THE MEMORY. ALL DATA WILL BE LOST. THIS CANNOT BE UNDONE, AND ONCE THE PROCESS IS UNDERWAY, YOU CANNOT STOP IT Power On the Apollo Vehicle Traffic Counter / Classifier Press the ALT ...