http://support.diamondtraffic.com/knowledgemanager en-us http://support.diamondtraffic.com/knowledgemanager ActiveKB NX support@diamondtraffic.com Fri, 03 Apr 2026 23:08:27 PDT 20 http://support.diamondtraffic.com/knowledgemanager/questions/117/ It is important to note that the Station ID referenced in Centurion’s Database is the Same Site ID that is referenced in our counters and classifiers. Each Location that you collect data fr ... Jesse Brady Fri, 21 Oct 2011 22:24:26 GMT http://support.diamondtraffic.com/knowledgemanager/questions/111/ There is a known issue with the Calibrotor and the UAA (Unicorn Limited, Apollo) units not displaying speeds correctly the following information explains why this is:Consider the following two veh ... Colin Gibson Fri, 21 Oct 2011 22:21:40 GMT http://support.diamondtraffic.com/knowledgemanager/questions/61/ Setting an Apollo to Display Metric (Manual Configuration of Counter) POWER ON power to Apollo Press the ALT + LEFT ARROW together. This will take the operator to the ‘ADVANCE ... Colin Gibson Mon, 03 May 2010 20:10:01 GMT http://support.diamondtraffic.com/knowledgemanager/questions/58/ RETRIEVING DATA FILES FROM THE APOLLO USING A DATAHOG: Turn off power to APOLLO, closing data study and moving all files to memory. Connect standard 9 pin (male to female) serial ... Colin Gibson Mon, 03 May 2010 19:49:29 GMT http://support.diamondtraffic.com/knowledgemanager/questions/57/ TO MANUALLY ERASE DATA FILES FROM THE APOLLO NOTE: USE THIS FEATURE ONLY IF YOU ARE CERTAIN YOU WANT TO ERASE THE MEMORY. ALL DATA WILL BE LOST. THIS CANNOT BE UNDONE, AND ONCE THE PROCESS IS ... Colin Gibson Tue, 01 Dec 2009 18:46:24 GMT