http://support.diamondtraffic.com/knowledgemanager en-us http://support.diamondtraffic.com/knowledgemanager ActiveKB NX support@diamondtraffic.com Sat, 11 Apr 2026 07:41:59 PDT 20 http://support.diamondtraffic.com/knowledgemanager/questions/85/ Flexible Conforming Pressure Mat Sensor Diamond Traffic Products has developed a flexible, portable or permanent pressure sensing mat for installation in foot, bicycle or snowmobile trails; ... Colin Gibson Sat, 11 Jul 2015 05:14:46 GMT http://support.diamondtraffic.com/knowledgemanager/questions/113/ Terminating Piezo sensors usually is done one of two ways. Either the termination is done using a terminal block and then connected to the counter using the UPP piezo harness or by individual BNC ... Colin Gibson Fri, 21 Oct 2011 22:22:59 GMT http://support.diamondtraffic.com/knowledgemanager/questions/82/ NORTH AMERICAN PHILIPS (Unencapsulated Sensors) The bare piezo electric axle sensors differ from the Philips aluminum channel encapsulated sensor by having a rigid copper tubing outside sheath. S ... Colin Gibson Fri, 21 Oct 2011 22:04:11 GMT http://support.diamondtraffic.com/knowledgemanager/questions/84/ ROADWAY MOUNTING FRAMEWORK This mounting frame is designed to be permanently installed in the roadway. The frame has a locking bar secured with machine bolts that allow piezo or resistive sensor ... Colin Gibson Wed, 09 Dec 2009 18:14:41 GMT http://support.diamondtraffic.com/knowledgemanager/questions/83/ PIEZO ELECTRIC AXLE SENSOR These are permanently installed axle sensor (class II) or weighing grade (class I) axle sensors manufactured by North American Philips. The sensor element is secured ... Colin Gibson Wed, 09 Dec 2009 18:02:04 GMT http://support.diamondtraffic.com/knowledgemanager/questions/81/ AMP ATOCHEM Brass Linguine (Unencapsulated Sensors) Class I (WIM) and Class II (Axle Sensor Only). This flat 1/16" (1.5mm) x 1/4" (6mm) brass piezo electric axle sensor can be taped temporarily t ... Colin Gibson Wed, 09 Dec 2009 17:35:23 GMT