http://support.diamondtraffic.com/knowledgemanager en-us http://support.diamondtraffic.com/knowledgemanager ActiveKB NX support@diamondtraffic.com Fri, 03 Apr 2026 23:09:12 PDT 20 http://support.diamondtraffic.com/knowledgemanager/questions/43/ The Phoenix is a data gathering instrument for use in the field (roadway). By using the Phoenix and one of several possible combinations of sensors, traffic data and vehicle classification can be ... Jesse Brady Fri, 14 May 2021 00:34:34 GMT http://support.diamondtraffic.com/knowledgemanager/questions/44/ The Phoenix II is a stand alone unit that is designed to work with sensors to detect and classify vehicular traffic on interstates, highways and roads. Robust military specification connectors p ... Jesse Brady Fri, 14 May 2021 00:16:27 GMT http://support.diamondtraffic.com/knowledgemanager/questions/121/ Prior to 2004 (before Centurion version 1.30) there is a known issue of Metric to US conversion errors. All classification units prior to 1999 could be set to either US or metric. After 1999 Me ... Colin Gibson Mon, 20 Aug 2012 23:36:35 GMT http://support.diamondtraffic.com/knowledgemanager/questions/37/ Overview Below we discuss the various ways the Phoenix MDK can collect data, and what types of sensors are required to collect each type of data. Please read this section carefully. The Phoenix M ... Jesse Brady Fri, 29 Jun 2012 20:48:38 GMT http://support.diamondtraffic.com/knowledgemanager/questions/42/ Each mode uses a different amount of memory for storing traffic data. This appendix is intended to give the user an approximation of how long a Phoenix MDK Field Unit may collect data before retri ... Colin Gibson Mon, 24 Oct 2011 23:33:09 GMT http://support.diamondtraffic.com/knowledgemanager/questions/110/ PROBLEM: Due to a binary to decimal conversion error inherent in the clock chip; the Phoenix, Unicorn, Pegasus units add the non-existent date of 02/29/2010 instead of moving to 03/1/2010. Th ... Colin Gibson Fri, 21 Oct 2011 22:20:57 GMT http://support.diamondtraffic.com/knowledgemanager/questions/109/ The Phoenix, Unicorn and Pegasus units allows for input of relay, open collector to ground, contact closure output from external sensors in either pulse or presence format. This allows the unit t ... Colin Gibson Fri, 21 Oct 2011 22:19:39 GMT http://support.diamondtraffic.com/knowledgemanager/questions/49/ Features Count 1 to 16 lanes Count methods include direction, lane subtraction and normal Classify 1 to 8 lanes Possible sensor arrangements per lane for classification: Two ... Colin Gibson Fri, 21 Oct 2011 21:11:08 GMT http://support.diamondtraffic.com/knowledgemanager/questions/41/ Some basic problems can occur during normal operation of your Phoenix MDK. Generally, they are caused by some small error in setup or sensor installation. Listed below are some basic problems and ... Colin Gibson Mon, 17 Oct 2011 23:29:12 GMT http://support.diamondtraffic.com/knowledgemanager/questions/39/ Overview The tables below describes the default bins categories that are used with the Pegasus, Phoenix and Unicorn MDK units. These “Bins” are used to total up all vehicles meeti ... Jesse Brady Mon, 17 Oct 2011 23:23:27 GMT http://support.diamondtraffic.com/knowledgemanager/questions/38/ Overview All Phoenix MDK counters come fully operable for use with a modem. You will need some type of telephone communication package to access the counter through the modem. Diamond Traffic ... Colin Gibson Mon, 17 Oct 2011 23:21:57 GMT http://support.diamondtraffic.com/knowledgemanager/questions/18/ The following is a list for known compatibility: Apollo: All Versions DataHog: 1.50+ Pegasus: 2.39 - 2.45 Phoenix: 2.39 - 2.45 Unicorn: 2.39 - 2.45 Unicorn Limited: All VersionsSprite: 1.40+Trail ... Colin Gibson Mon, 17 Oct 2011 20:11:25 GMT http://support.diamondtraffic.com/knowledgemanager/questions/86/ Colin Gibson Wed, 09 Dec 2009 20:17:24 GMT