Centurion Version History 1.46


"Direct Call Directory" or through the map/polling screen link. 

Build #0001 04/01/2018

  • Added support for UPP v5.09 "Block Retrieve" file command.
  • Changed the Geocounts output format to reduce the number of bins on the "TC" and "TS" line by one, and to remove the "other" bin value (the last value) on the "TL" line.
  • Fixed bug displaying the "Last Called" value on the Map View.
  • Added database backup/restore functionality.
  • Changed so any file processed from DDS is always stopped after one file read.

Build #0002 04/10/2018

  • Fixed bug in not doing Card C export with Length bins when ALL the lanes are length bins.
  • Added Multiple Simultaneous Polling ability (up to 20 sites at the same time).

Build #0003 05/03/2018

  • Added an "IR Camera" TSProcess function to handle data from Omega X3 v2.00 that has IR Camera data within a file.
  • Fixed hiding the ADT Lane #1 on the 1 Lane Class TSProcess results when customer does not do directional.
  • Added support for the "IR Camera" as a sensor type in all modes.
  • Fixed a bug in the Parking Lot system which caused "Access Violation" to appear when closing link to site after clicking the "Link" button.
  • Added "-PLMONITOR" command line to monitor activity on Parking Lot System. This creates a file for each counter link and saves the send/receives to the counter into a file in the main program directory name "PLMONx.TXT".
  • Changed sending a CTRL+X before 0x01+G+T on the Parking lot monitor. This improves linking to sites that always have carrier active.
  • Fixed bug with scanning for loop board #3 on Pegasus and Unicorn links.

Build #0004 05/09/2018

  • Added new trigger options for UPP v5.10 and higher.
    • "Vehicle Lenght < "
    • "Vehicle Length > "
  • Included the "Interval Start" incident detection.
  • Changed the "Pulse OC Action" value to be in hundredths of a second."

Build #0005 05/17/2018

  • Changed so it does not give the corrupt EOF error at the end of files that have been downloaded from DDS.
  • Major change to use the Indy 10 FTP access components for all DDS access. This greatly speeds up the process and is more reliable.
  • Added a count of the files to the DDS Files tab names.
  • Fixed Access Violation bug at the end of downloading from a counter linked to by the Parking Lot System.
  • Changed default PLSystem poll command from "R-1" to "R-2".
  • Added error message to poll log when trying to manually download a specific file that does not exist.
  • Trims off extra file data from block retrieve command (especially noticeable with very small files).
  • Fixed a bug with Block Retrieving files under the polling system (was not correctly fixing them after the fact).
  • Added sending a 0x18 when calling any SoIP site to make sure it exits from any "RING" retrieves.
  • Fixed not showing Auto-Listen Mode on the Counter Setup Report.
  • Fixed showing Listen Reset times on Counter Setup Report when auto-listen is disabled but listen rest times are enabled.
  • Fixed showing "Attempt #x" on subsequent downloads after a successful download of a file.
  • Made sure if user clicks the Cancel button when doing a poll through the Parking Lot System it stops all polling.
  • Fixed the "Poll When Possible" to only do it once per day.
  • Changed canceling polling to eliminate access violation errors when multi-site polling is enabled.
  • Multi-site polling now waits when for a modem connection to finish before starting with additional sites.

Build #0006 05/18/2018

  • Changed FTP components used for all DDS access. This greatly speeds up the process and increases reliability of the connection.
  • Added a count of the files to the DDS Files tab names.
  • Fixed Access Violation bug at the end of downloading from a counter linked to by the Parking Lot System.
  • Changed default PLSystem poll command from "R-1" to "R-2" (does not retrieve the open file).
  • Added error message to poll log when attempting to manually retrieve a file that does not exist.
  • Trims off extra file data from block retrieve command (especially noticeable with very small files).
  • Fixed a bug with Block Retrieving files under the polling system (was not correctly fixing them after the fact).
  • Added sending a 0x18 when calling any SoIP site(s) to make sure it exits from any "RING" retrieves.
  • Fixed not showing Auto-Listen Mode on the Counter Setup Report.
  • Fixed showing Listen Reset times on Counter Setup Report when auto-listen is disabled but listen reset times are enabled.
  • Fixed showing "Attempt #x" on subsequent downloads after a successful download of a file.
  • Made sure if a suer clicks the Cancel button when doing a polling through the Parking Lot System it stops all polling.
  • Fixed the "Poll when Possible" to only do it once per day.
  • Changed canceling polling to eliminate access violation errors when multi-site polling is enabled.
  • Multi-site polling now waits with a modem connected site until it finishes before processing any additional queued sites.
  • Fixed the "Poll when Possible" option to only poll possible connections once per 24 hours.

Build #0007 05/20/2018

  • Added option to do web updating via HTTP instead of FTP

Build #0008 07/10/2018

  • Changed to allow blank Diamond Account names during Phoenix & Iris modem setup (custom server).
  • Fixed Site copy not checking for NULL Bluetooth names.
  • Added ability to include GPS data in the Export Data output.
  • Added showing extended site info in the Export New Ascii format.
  • Added support for UPP v5.20 (or higher) firmware and handling the new Performance/Stable modes when combined with loop board firmware v2.00 (or higher).
  • Fixed occasional non-updating loop sensor on Monitor Sensors screen.
  • Added CTRL + ALT + M to set Modem Values without needing to stop data collection.
  • Added 460800 & 921600 baud rate options for Loop Board hardware v2.0 (or higher).
  • Major change to the DDS User Interface to improve the way files are displayed (especially when there are many of them).
  • Added ability to specify a FTP server and to modify the login name on the DDS Interval Data Monitor and the Parking Lot DDS system.

Build #0009 07/16/2018

  • Changed cap values to have a default separation of at least two levels.
  • Added setting the "Enviro Storage" mode on the Omega X3 and Omega G (Setting Screen). This works with v1.47/v1.10 respectively and higher.
  • Also added reading/writing the "Weather" value from Omega X3 v1.47 and Omega G v1.10 and higher ("SA" and "GS" functions).
  • Changed the timestamp 0xF2 format to support the new OX3/OAG version. This includes temp. to the tenth of a degree C and a Primary/Secondary battery voltage to the hundredth of a volt.
  • Added support for the 0xF2 record from standard data (both reading/writing). This changes the Binary and ASCII formats as well.
  • Added the Enviro data to the "Memo" line of imports when present.


Related Articles

No related articles were found.

Attachments

No attachments were found.

Visitor Comments

Article Details

Last Updated
20th of July, 2018

Software
Centurion CC, Centurion Field, Centurion Gold, Centurion Parks

Would you like to...

Print this page  Print this page

Email this page  Email this page

Post a comment  Post a comment

 Subscribe me

Subscribe me  Add to favorites

Remove Highlighting Remove Highlighting

Edit this Article

Quick Edit

Export to PDF


User Opinions

No users have voted.

How would you rate this answer?




Thank you for rating this answer.

Continue